Insulating your home without any hassle

Are you worrying to insulating your home this season .As practice shows, most private homes in Australia do not comply with the standards determined by the requirements of the Construction Norms and Rules . They are cold, the air throughput is very high, and as a result, a significant part of the money is spent on heating the room, which in turn continues to grow.

Many began to logically think about how to insulate a house inexpensively, quickly, and effectively. At the same time, the main requirements when choosing insulation are price, efficiency, speed, and minimum effort. All this is available in Isoplat slabs. Isoplat is the correct answer to how to quickly and inexpensively insulate a house.

Insulation of the house from the outside with Isoplat windproof boards

Experts recommend insulating the outside walls of a private house or country house with Isoplat windproof boards. This is the best option to insulate a house quickly. Why is this option more correct and reliable? Let’s go in order.

  • Firstly, insulating a house from the facade is most correct.
  • Secondly, Isoplat slabs provide reliable protection from wind and blows when used in wall insulation Central Coast. With external insulation, it is possible to effectively cover all construction flaws in the structure and stop the blowing out of heat. The slabs are relatively soft to fit tightly on all surfaces.
  • It is nailed and, at the same time, dense enough to act as a windbreak. Let us remind you that the density of the material must be at least 230 kg/m3 to perform the functions of wind protection.
  • Thirdly, the high vapor permeability of windproof boards helps remove moisture from the inner layers of the wall/roof pie, ensuring constant drying. Thus, the slab does not allow moisture to pass into the wall but allows excess moisture in the wall/roof of the house to come out freely, preventing mold and mildew from forming.
  • For effective “breathing” of walls, each subsequent layer of the wall/roof structure from the inside to the outside must be more vapor-permeable than the previous one. It turns out that the layer that goes before the finishing of the facade should have the highest vapor permeability value, which is what Isoplat slabs have.

Calculate the thermal resistance of the slabs

Let us consider the characteristics of thermal resistance in more detail. In order to correctly calculate the thermal resistance of the slabs, it is necessary to find the slab’s thickness ratio (0.025 m) and the coefficient of its thermal conductivity (0.055 W/m*0C). Add the thermal resistance of the material of the walls to the resulting value (0.45 m*0C / W).

Thus, the room will become one and a half times warmer by insulating a wall made of timber measuring 15 cm with a thermal resistance of 1.07 m*0C/W.

Installation technology Isoplat

Now, let’s figure out insulating your home from the outside quickly. Installation of windproof boards is straightforward. Depending on the base material, fastening methods may vary:

-to fasten the slabs to the timber, use galvanized nails with a broad head or a construction stapler;
A brick wall requires sheathing.

An undoubted advantage of Izoplat slabs is the ability to apply almost any facade finishing on top of the slabs, from curtain facades to plaster. With this material, you will always know how to insulate your house inexpensively.

Internal thermal protection of houses

For several objective reasons, it is only sometimes possible to insulate houses from the outside. How to inexpensively insulate a house in this case? The solution to this situation is Izoplat thermal insulation boards for interior work. They differ from windproof boards only because they do not contain paraffin and are cheaper.

They produce slabs with thicknesses from 8 mm to 25 mm; their thermal conductivity, regardless of thickness, is 0.045 W/m*0C. Thus, the thermal resistance for a 12 mm slab will be 0.27 m*0C/W and 0.56 m*0C/W for a 25 mm slab.

With such indicators, these stoves are effective both in summer and winter. During the hot season, the room will become calmer; during the cold season, less energy will be the only option to heat the room. As a result, heating or air conditioning costs will decrease.

Installation of Izoplat thermal insulation boards indoors

The question often arises about Isoplat: how to attach slabs to the wall? Installation of slabs is fast and easy while insulating your home.

So, to fix Isoplat, use glue directly to the wall surface. You can use lathing – an excellent solution for leveling uneven walls if necessary.

After installation, drywall, sheathing, or attach the slabs with other finishing materials . You can also pay attention to Isotex panels, which are based on a 12 mm Isoplat plate and already have stylish Scandinavian decor – vinyl or paper wallpaper from the Durafort brand.

Also Read: How to get rid of gnats in house with vinegar

Insulation of ceiling

It’s not just the walls that allow heat to pass through. Sources of heat loss can also be the floor, ceiling, and window frames. Insulation is often install using mineral wool, which must be extremely carefully to protect with vapor barrier films.

If installed correctly, mineral wool absorbs moisture and settles and retains its thermal insulation properties – effort and financial resources are well-spent, but there is no result. How to inexpensively insulate a house from the outside in this case?

Izoplat thermal insulation boards will cope with this problem – they will provide thermal insulation, sound insulation, wall insulation central coast and an optimal humidity level in the house.

Installation is carried out on ceiling beams or directly on the old surface, cleaned of dirt/dust and loose elements using nails or a stapler with large staples. Finishing can be done using Isotex panels, plasterboard, or suspended ceilings.

Insulation of floor

As for the floor – when it’s cold, it’s hard not to pay attention. How to insulate floors in a house quickly and cheaply? Heat- and sound-insulating Izoplat boards and special underlays for parquet boards or laminate can also solve this problem. On top of the slabs, you can lay laminate, parquet boards, floorboards, linoleum, and carpet.

To correctly calculate the number of slabs you will need, calculate the area of ?? the surface that needs to be insulated and add 10%. The boards are stacked with a small expansion gap (1-2 mm), which is necessary for the wood to “breathe” during humidity and temperature changes.

These gaps have virtually no effect on the quality of insulation; however, for the best effect, the slabs can be laid in 2 layers at intervals, overlapping the joints of the first layer with the second.